Home‎ > ‎h. Point of Sale‎ > ‎

b. Credit Card Processing

Costbucket POS is integrated with Pax and Miura EMV machines.  Pax is available in the USA and Canada while Miura is available in the UK and USA.  Both readers require adding the IP address of the reader to Costbucket to allow the POS to communicate with the reader.   The settings are available by selected EMV on the POS settings then input the IP address and save. 

The supported Pax machines are:
  • DX Series
  • S300
  • S500
  • Q80
  • S80
  • S920
  • PX Series Multilane

How do you set a static IP in the SP30? – Do this:

  • Press the “F” key
  • Select Option 2 (Communication)
  • Input the System Password (Today’s date mmddyyyy) and Press “Enter”
  • Select Option 1 (Main Communication)
  • Select Option 1 (LAN)
  • Select Option 3 (LAN Parameters)
  • Select Option 1 (LAN Type)
  • Select Option 2 (Static)
  • Select Option 2 (IP Address)
  • Input the correct IP Address and press “Enter”
  • Select Option 3 (Subnet Mask)
  • Input the Subnet Mask and press “Enter”
  • Select Option 4 (Gateway IP)
  • Input the correct IP address and press “Enter”
  • Select Option 5 (DNS IP)
  • Input the correct IP address and press “Enter”

How do you activate the device? – Do this:

  • Press the “F” key to enter the main menu
  • Select Option 1 (System Settings)
  • Select Option 1 (App Management)
  • Select Option 1 (Activate)
  • Select Option 1 (Online)

The device will connect and become activated.

How do I update the application in the SP30? – Do this:

  • Press the “F” key to enter the main menu
  • Select Option 1 (System Settings)
  • Select Option 1 (App Management)
  • Enter the System Password (Today’s date mmddyyyy) and Press “Enter”
  • Select Option 2 (App Update)

The device will connect and the application will be updated.

How can I confirm the device Serial Number? – Turn the device over and read the label. If the label is not readable, you can do this:

  • Press the “F” key to go to the Main Menu
  • Select Option 1 (System Settings)
  • Select Option 1 (App Management)
  • Enter the System Password (Today’s date mmddyyyy) and Press “Enter”
  • Select Option 4 (Serial Number)



Comments